INTRODUCTION OF BLUESEAS BWMS
·Working mechanism is electrolysis of salt water to producechlorine and chemically active free radicals, which arepowerful to kill organisms in water
·Efficiency and risk assessments had been tested and/orverified by PSB TUV, and DHI. The Class involved were/areDNV GL, RINA and ABS.
·It is protected by a patent (national phase-Singapore).
·BlueSeas obtained basic approvals from IMO in July 2011.
·BlueSeas BWMS is used in an APL container ship (2500TEU and ballast water capacity of 400-500 m3/h). 12-monthtest shows that our system is very stable and has not causedany issue/problem in operation of ship
FULL-SCALE BLUESEAS BWMS @ APL PUSAN
FLOW CHART AND HMI OF PLC
Ballasting operation
PERFORMANCE OF BLUESEAS BWMS IN SHIPBOARD STUDY @APL PUSAN
Flow rate and TRO during operation
List of treatment result
Energy consumption: 35-45 kwh for 1000 m3/h
PERFORMANCE OF BLUESEAS BWMS IN LAND-BASED STUDY(DATA FOR FINAL APPROVAL FROM DHI TESTING FACILITY)
Eco-toxicity study, measurement of disinfection byproducts, modeling forenvironmental risk assessment, and measurement of chlorine /hydrogen gasesby DHI and PSB TUV show that BlueSeas BWMS has no harmful effects tomarine environment and ship.
MORPHOLOGY AND MECHANICAL STRENGTH OF COATEDSTEELS [8 MONTHS] IN CORROSION STUDY
ADVANTAGE OF BLUESEAS
Smaller foot-print:
-For ballast water of 1000 m3/hour, space required is 6 m2
Lower energy consumption:
-energy consumption is ~40 kW for ballast water of 1000m3/hour vs 80 to 200 kW of others.
Lower pressure drop: no more than 0.5 bar vs 1 to 2 bar ofother BWMSs
-It is flexible in installation
ADVANTAGE OF BLUESEAS, CONT’D
Ease in operation:
-Operation modes: Fully PLC control or manual control
-Major unit’s maintenance is once in 1 to 2 years.
Modular design
-Standard reactor is 400 mm x 400 mm x 1000 mm for 1000 m3/hour
-Reactor can be designed according to space requirement
Longer life-space of electrode
- Our test shows that electrode for production of chlorine can becontinuously for 6000 hours in one year without maintenance.
- Electrode can last for more than 10 years
IP 22 to 67 and EX
GL approval for use in an APL container ship
GOOD BUSINESS OPPORTUNITIES
Cost of devices/production is
Total = 30,000 (rectifier) + 20,000 (reactor) + 25,000 (filter) + 8,000 (PLCcontroller) + 4000 (TRO device) + 6000 (sensors) + 7000 (pumps, panels, etc)= 100,000 SGD
Unit price in market is 400,000 – 800,000 USD
IMO AND TYPE APPROVAL
Basic approval from IMO (MEPC 62)
Recognition by MPA
HIGHLIGHT OF BLUESEAS BWMS IN 2012 SINGAPORE MARITIME WEEK
J. Paul Chen
Envirotech Consultancy Pte Ltd (ECPL), Singapore
jpaulchen@blueseas.com.sg; jpaulchen@gmail.com; +65-9770-8092
更多资讯,欢迎扫描下方二维码关注中国轮胎商务网微信公众号(tire123)
友情提醒 |
本信息真实性未经中国轮胎商务网证实,仅供您参考。未经许可,请勿转载。已经本网授权使用的,应在授权范围内使用,并注明“来源:中国轮胎商务网”。 |
特别注意 |
本网部分文章转载自其它媒体,转载目的在于传递更多行业信息,并不代表本网赞同其观点和对其真实性负责。在本网论坛上发表言论者,文责自负,本网有权在网站内转载或引用,论坛的言论不代表本网观点。本网所提供的信息,如需使用,请与原作者联系,版权归原作者所有。如果涉及版权需要同本网联系的,请在15日内进行。 |